[王宝杰]

VygisToolbox的安装手册

安装手册为 VygisToolbox and VPower box
(NOT valid for old sentinel dongles)


a -最重要： 从您的个人计算机分开所有仪器!!!

- 去到其中一个自动下载支持区域 :
http://forum.gsmhosting.com/vbb/showthread.php?t=253789
下载Win98或WinXP的Smartcarddongle软件和在您的个人计算机安装(安装那个exe文件) .

现在连接 VygisToolbox (or VPower). It will ask also for driver for the USB part (communication).

- 下载这从支持区域的软件并且安装他们 .
Take care - the VygisToolboxes and Vpower boxes, BLACK USusing the SMALL Box are needing on Win XP the special driver, also avaiable there.
If they are installed properly --> then you will see in ''Device Manager'' in the USB section, the VygisUSB2RS232 port component.

- 下载从那个站点的读取ID软件，并且读仪器ID

- 如果您能读出仪器id ==>那么适当地安装您的smartcarddongle软件
SEND the Dongle ID to your reseller and he MUST send you the reg files for your order.
NOBODY except your reseller can provide this for you
DO NOT ASK ME FOR YOUR REG FILE !!!

AFTER YOU RECEIVE THE REG FILES FROM YOUR RESELLER:

b - Now go to one of the automatic support areas:
http://forum.gsmhosting.com/vbb/showthread.php?t=253789

Download LG supporter software, for VygisToolbox (for VPower you have to use O2 reg file and O2 supporter software) from there and copy in a separate folder
Copy LG reg file in same folder
START Now the LG supporter software --> and you get acess to the LG support area.
Download the LG softwares in different folders and copy a copy of the LG reg in each of this folders.

c- If you have buyed extra activations or full pack, then you have more reg files like Alcatel (Full pack) , O2 (Extra payed) ..., then take from same automatic support areas, the corresponding supporter software (Ex: Alcatel supporter if you have alcatel reg)... and you get access at that support areas and download and install this softwares.

d - Now your softwares should be installed, and the reg files copied in the correspondong folders ==> all is ready to run

About the USB Box, Switches, What RJ45 connector to use and rest of infos --> please read here:

http://forum.gsmhosting.com/vbb/show...1&postcount=23

Well, this should be complete and step by step INSTALLATION MANUAL.

ALSO HERE HOW TO ACESS THE 2 AUTOMATIC AREAS DIRECTLY FROM SOFTWARE - CHECK ATACHEMENT

regards,
Gobi

[3339133]

都是好东西我想要但没币子

[荣--少]

晕.下一个资料最少用10个大洋...真不知怎样办好.

[4602234]

好东西 就是没有币 顶起来

[suncheng]

感谢你的驱动

[gonganwen]

版主,为什么我的VYGIS的USB驱动安装不了,是那种最新版的全红色盒子.在"设备管理器"里面只显示一个主机的端口.麻烦帮忙解决一下.

[ua9840qw]

支持下先```

[soney81122]

确实是好东西 免去官方寻找的难题~~但是 要很多钱钱~~~

[hyjian]

谢谢分享。菜鸟的最爱

[zgxwx]

真不错，学习了。关键是要挣点钱好下载资料。